COM-DIO5+5
Digital Input/Output With RS-232 Interface
This module contains five galvanically isolated digital inputs and five outputs. The RS-232 interface is used to transmit data to and from the module, as well as for the power supply of the module when only the inputs are being used.
Typical applications: Control of actuators (indicator lights, signalers, etc.), scanning of sensors (scanners, light barriers, etc.)
Typical applications: Control of actuators (indicator lights, signalers, etc.), scanning of sensors (scanners, light barriers, etc.)
#Technical Data
Characteristics
- Galvanically isolated inputs and outputs: 5 of each
- RS-232 interface
- Power supply via the RS-232 interface or from an external power supply unit
- Metallic case
Interface
- Serial interface according to RS-232 standard
- Connector: D-SUB plug, 9 pins
- Data transfer rate: 9600 kBaud
- Interface parameters: 8 data bits, 1 stop bit, even parity
Digital Inputs / Outputs
- Connector: 25-pole D-SUB socket
- Nominal voltage of the inputs: 24 V=
- Current consumption of the inputs: 5.3 mA at 24 V=
- Switching capacity of the outputs: 150 V= / 125 V~, 1 A, 30 W / 60 VA
External Power Supply
- Nominal voltage: 12–24 V=
- Connector: Socket for barrel connector with pin ø 2.1 mm, polarity: inside +, outside -
- Current consumption: 27 mA typ. with activated outputs
- Reverse polarity and overvoltage protection
General
- Metallic case: material: aluminum, natural anodized, dimensions: 84 × 69 × 24 mm3 (length × width × height without plugs)
- Weight: 100 g
#Download
User manual
Beschreibung-1.00_B.pdf, 342.2 KB: User manual (currently only available in German) |
Software
COM-DIO_1-30.rar, 50.9 KB: Control and diagnostic software |
COM-DIO_1-11.rar, 46.1 KB |
COM-DIO_1-10.rar, 47.9 KB |
COM-DIO_1-01.rar, 47.7 KB |
COM-DIO_1-00.rar, 47.6 KB |