Logo with link to home page
Show/hide main menu
ENGLISHDEUTSCH
DEUTSCH
Printed from:
www.cgc-instruments.com
Interface Adapters

USB-DIO4+4-AIO1+1

Analog and Digital Inputs/Outputs with USB Interface

Jump to: Technical Data Download

This module contains four galvanically isolated digital inputs and four outputs, as well as one analog input and one output. The USB interface is used to transmit data to and from the module, as well as for supplying the module with 5 V.

Typical applications: Control of actuators (indicator lights, signalers, etc.), scanning of sensors (scanners, light barriers, etc.)

#Technical Data

Characteristics

  • Analog inputs and outputs: 1 of each
  • Galvanically isolated digital inputs and outputs: 4 of each
  • USB interface
  • Power supply via USB
  • ABS top-hat rail case according to DIN EN 50022

USB Interface

  • Standard: USB 2.0
  • Data transfer rate: up to 12 MBit/s (Full Speed)
  • Parameters of the virtual interface: 230.4 kBaud, 8 data bits, 1 stop bit, even parity

Connectors

  • Inputs and outputs: screw terminals with 12 and 9 contacts
    Connection capacity:
    • Conductor sizes: 0.2–2.5 mm2
    • Flexible conductor sizes with ferrules: 0.25–1.5 mm2
  • USB connection: USB socket type B

Digital Inputs

  • Polarized relay coil
  • Nominal switching voltage: 12 V=
  • Permissible input voltage range: 9–24 V= (at 40°C max.)
  • Current consumption: 5.5 mA at 12 V=

Digital Outputs

  • Relay contact: normally open contact
  • Switching capacity: 50 V= / 50 V~, 1 A, 30 W / 60 VA

Analog Input

  • Nominal voltage: +10 V
  • Permissible input voltage range: -2 – +13 V=
  • Input impedance: 400 kOhm

Analog output

  • Voltage range: 0 – +10 V
  • Maximum output current: 5 mA

Power supply

  • Controller and output relays: 5 V= from the USB interface
  • Auxiliary voltage 12 V:
    • Can be switched on by software
    • Maximum load: 25 mA (total consumption from the auxiliary voltage 12 V and from the analog output)
  • Current consumption:
    • ca. 13 mA in idle state
    • ca. 95 mA at 25 mA from the auxiliary voltage 12 V

General

  • Case:
    • Rail mounting according to DIN EN 50022
    • Material: plastic, top part gray, bottom part black
    • Dimensions: 70 × 86 × 60 mm3 (width × height × depth)
  • Weight: 120 g

#Download

User Manual

USB-ADIO_2-10_A.pdf USB-ADIO_2-10_A.pdf, 442.0 KB: User manual (currently only available in German)
Older versions
USB-ADIO_1-00_A.pdf USB-ADIO_1-00_A.pdf, 469.5 KB

Software

USB-ADIO_1-10.zip USB-ADIO_1-10.zip, 4337 KB: Control and diagnostic software
Older versions
USB-ADIO_1-01.zip USB-ADIO_1-01.zip, 4338 KB
USB-ADIO_1-00.zip USB-ADIO_1-00.zip, 4334 KB
Software.txt Software.txt, 149 B: Software revision history

Firmware

USB-ADIO_1-12.txt USB-ADIO_1-12.txt, 24.4 KB: Firmware
Older versions
USB-ADIO_1-11.txt USB-ADIO_1-11.txt, 24.3 KB
USB-ADIO_1-10.txt USB-ADIO_1-10.txt, 24.2 KB
USB-ADIO_1-01.txt USB-ADIO_1-01.txt, 23.3 KB
USB-ADIO_1-00.txt USB-ADIO_1-00.txt, 23.0 KB
Firmware.txt Firmware.txt, 314 B: Firmware revision history
Information on how to open the various file formats can be found here.